Click image to view full size image
Professional electric sheet ironing machine with CE, ISO9001
1. It is suitable for hotel, restaurant, hospital, industry-mining enterprise to make form-finish iron for flat fabric, bedsheet, bedcover and table cloth after washing and extracting.
2. This equipment adopt frequency-conversion for speed adjusting, customer can adjust speed according to fabric demand to improve ironing efficiency
3. Large diameter roller drum, stainless steel, smooth surface minimize the fabric abrasion
4. Roller are rotated through gear movement, thus the drive is smooth, low noise level and steady
5. Simple control with Start/Stop button
6. Three-phase electrical system, overload protection, voltage and short circuit protection, emergency stop switch
7. Reducer connected to the pulley and chain wheel. Transmission is reliable.
8. Steam, electrical or gas heating, you can select as you need
1. It is suitable for hotel, restaurant, hospital, industry-mining enterprise to make form-finish iron for flat fabric, bedsheet, bedcover and table cloth after washing and extracting.
2. This equipment adopt frequency-conversion for speed adjusting, customer can adjust speed according to fabric demand to improve ironing efficiency
3. Large diameter roller drum, stainless steel, smooth surface minimize the fabric abrasion
4. Roller are rotated through gear movement, thus the drive is smooth, low noise level and steady
5. Simple control with Start/Stop button
6. Three-phase electrical system, overload protection, voltage and short circuit protection, emergency stop switch
7. Reducer connected to the pulley and chain wheel. Transmission is reliable.
8. Steam, electrical or gas heating, you can select as you need
| Model | Unit | YPAI-2800 | DYPAI-2800 | DYPAII-3000 | YPAIII-3000 | YPAIII-3300 | YPAIV-3300 | YPAV-3300 |
| Ironing scope | mm | no limit,≤2800,≤3 | no limit,≤3000,≤3 | no limit,≤3000,≤3 | no limit,≤3300,≤4 | no limit,≤3300,≤5 | ||
| Drum quantity | 1 | 2 | 3 | 4 | 5 | |||
| Steam pressure | Mpa | 0.4-0.6 | 0.4-0.6 | 0.4-0.6 | ||||
| Heating power | Kw | 36 | 72 | |||||
| Drum dimension | mm | 800*2800 | 800*3000 | 800*3000 | 800*3300 | 800*3300 | ||
| Ironing speed of frabic | m/min | ≤8 | ≤17 | ≤26 | ||||
| Motor power | Kw | 0.75 | 1.5 | 2.2 | 3 | 4 | ||
| Power | V | 3HP+N 380V\22V 50HZ | ||||||
| Overall dimension | mm | 3840*1500*1400 | 4040*2500*1400 | 4040*3500*1400 | 4340*3500*1400 | 4340*3500*1400 | 4340*4500*1400 | 4340*5500*1400 |
| Overall weight | Kg | 1400 | 2200 | 2800 | 3000 | 3600 | 4000 | |